Monday, December 21, 2009

San Bernardino Garage Door Repair - Try It Yourself

By Andy Harsh

If you own a home chances are you have a garage. If you have a garage, it will have a door on it. Sometimes the door will act badly and not open or close as it should. If that is the case, you can attempt to correct the problem yourself. If you feel the problem requires professional assistance and you live near San Bernardino, contact with a san bernardino Garage Door Repair person may be in order for you.

Over years of use, garage door bolts can loosen. A first place to look for the issue is a loose bolt. The loose bolts can result from vibration or the door shrinking. With the door down, tighten all the bolts. Replace any missing nuts. If a hinge is very loose, try to put it in the middle over the joint between the door panels.

Next check the door tracks and see if they are bolted securely to the wall and ceiling. Make sure there is at least an inch of clearance between the door and track. If the door is binding on the track then a spring tension adjustment may be needed.

If any part is mostly rusty like the cables or springs, replace them. Replace springs in matched pairs. If you do not, the door will be unbalanced and cause binding. One of the most common garage door problems is a worn out pulley.

Each garage door has four pulleys. Two pulleys are stationary and two are movable. To look for wear, take the spring tension off the pulley. Open the garage door to do this. Open the door until the spring starts drooping and then add a clamp to the track. This will hold the door open. Make sure the automatic garage door is unplugged so it will not begin to close and injure someone.

Check pulleys and make sure there is little movement. They can rotate but that is all. If the pulleys wobble they need replaced. Stationary pulleys are the ones that wear out and are mostly the culprit. This does not sound as they would but the cable puts force on them sideways and that wears them out.

Garage doors can be tricky but fixing them just takes a little bit of know how. There are a few things to look at first to determine the problem. If the repair is a little more complex, call a professional. Do your homework and hire a trustworthy company. If it is an easy repair try to do it yourself and save some money.

About the Author:

No comments: